Magnum - Wafer e Split Wafer ball valves OMAL Automation | ETI Italy
Magnum wafer ball valves

Magnum ball valves

Wafer and Split wafer, PN 16-40 and ANSI 150-300, carbon steel and stainless steel ball valves

Features

STANDARD FEATURES
• No protuding floating ball, full bore
• Soft-seat seal TFM 1600
• Standard for connecting flanges: EN 1092-1; ASME B16.5
• Operating temperature see temperature pressure diagram
• Pressure Class: PN16-40; ANSI 150-300
• Tightness Class: EN12266-1 rate A
• Intercepted fluid: air, water, gas, petroleum and petrochemical products.
• Antistatic device EN12266-2
• Stem seal: TFM 1600 V-pack
• Additional seal on stem with FKM O-ring
• Anti Blow-out stem
• Actuator connection as per standard ISO 5211
• Closing angle >7°
• Superficial treatment: blueing

FEATURES ON REQUEST
• LF2 carbon steel for low temperature execution (-40C°)
• For other flange types please contact our sales department
• Heating jacket
• Sealing in: PTFE reinforced with glass (RPTFE-GF), PTFE reinforced with carbon-graphite (RPTFE-CF). For other types of materials please contact our sales department
• Mono-directional version with pressure-relief hole in the ball
• Stainless steel lever . For versions in materials different from the standard (body, ball, stem), please contact our sales department.
• Stainless steel Stem nuts and springs
• Superficial treatment: white zinc coating,epoxy coating (for other coating please contact our sales department)
• ATEX marking and certificate ON REQUEST

CERTIFICATIONS
• In compliance with European Directive 2014/68/EU PED.
• Fugitive Emisson ISO 15848 (ISO FE BH-C03-SSA0).
• TA-LUFT VDI 2440.
• FIRE SAFE: ISO 10497 / API 607.
• Safety integrity level up to SIL 3 according to IEC 61508.
• In compliance with ATEX 2014/34/EU European Directive (ATEX certificate ON REQUEST).

ENGINEERING STANDARDS
• Body thickness in compliance with: ASME B16.34, ASME VIII div.1, EN 12516.
• Materials and rating in compliance with ASME B16.34 for ANSI valves and EN 12516 for PN valves

STANDARD FEATURES
• No protuding floating ball, full bore
• Soft-seat seal TFM 1600
• Standard for connecting flanges: EN 1092-1 ed. 2008; ASME B16.5
• Operating temperature see temperature pressure diagram
• Pressure class: PN16-40 - ANSI 150-300
• Tightness Class: EN12266-1 rate A
• Intercepted fluid: air, water, gas, petroleum and petrochemical products, aggressive fluids
• Antistatic device EN12266-2
• Stem seal: TFM 1600 V-pack
• Additional seal on stem with FKM O-ring
• Anti Blow-out stem
• Actuator connection as per standard ISO 5211
• Closing angle >7°

FEATURES ON REQUEST
• For other flange types please contact our sales department.
• Sealing in: PTFE reinforced with glass (RPTFE-GF), PTFE reinforced with carbongraphite (RPTFE-CF). For other types of materials please contact our sales department
• Mono-directional version with pressure-relief hole in the ball
• Stainless steel lever
• Stainless steel Stem nuts and springs
• For versions in materials different from the standard (body, ball, stem), please contact our sales department.
• ATEX marking and certificate ON REQUEST

CERTIFICATIONS
• In compliance with European Directive 2014/68/EU PED; Fugitive Emisson ISO 15848 (ISO FE BH-C03-SSA 0); TA-LUFT VDI 2440; FIRE SAFE: ISO 10497 / API 607
• Safety integrity level up to SIL3 according to the IEC 61508
• In compliance with ATEX 2014/34/EU Directive , ATEX certificate ON REQUEST.

ENGINEERING STANDARDS
• Body thickness in compliance with: ASME B16.34, ASME VIII div.1, EN 12516.
• Materials and rating in compliance with ASME B16.34 for ANSI valves and EN 12516 for PN valves

TOP